Nokia C5 MIC mouthpiece not working solution - In the past, when I started to start blogging, many thoughts disturbed me. I want to have a blog with a nice and interesting look. I am constantly looking for basic tutorials from some web and blogs on the internet. And thankfully, one by one I started to do it, and of course have to go through some confusion process first, but the most important of a blog that is content, yes on the blog
Innaz Review we will discuss a lot of information about gadgets that are very in need by you, now we will discuss first about Nokia C5 MIC mouthpiece not working solution please refer to the information we will convey until completion:
Articles :
Nokia C5 MIC mouthpiece not working solution
full Link :
Nokia C5 MIC mouthpiece not working solution
Article Nokia C5,
You can also see our article on:
Nokia C5 MIC mouthpiece not working solution
Here's the solution covers for Nokia C5 microphone problem repair. This solution shows the location of the digital microphone on the PCB board, including the line paths that also needs to be trace and check like the microphone supply voltage, MIC clock and MIC data signal line paths.
These three line paths which need to check first before attempting to replace the Digital Microphone Module.
Nokia C5 Microphone Failure Repair Solution
The mic supply voltage line paths is came from
the power management chip labeled as GAZOO. while the corresponding Data and Clock signal line paths is located near the CPU IC. There is a 47 ohms filter resistor is connected across the MIC clock signal, check and or replace it if found damaged or faulty.
If all the line paths is seems all okay, proceed to replace the MIC module.
0 komentar:
Posting Komentar