Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution - In the past, when I started to start blogging, many thoughts disturbed me. I want to have a blog with a nice and interesting look. I am constantly looking for basic tutorials from some web and blogs on the internet. And thankfully, one by one I started to do it, and of course have to go through some confusion process first, but the most important of a blog that is content, yes on the blog
Innaz Review we will discuss a lot of information about gadgets that are very in need by you, now we will discuss first about Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution please refer to the information we will convey until completion:
Articles :
Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution
full Link :
Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution
Article Nokia C1-01,
You can also see our article on:
Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution
This is the Nokia C1-01 Solution for an abnormal display problem, such as blank or empty
screen, garbled or dark
screen display. This solution may works if you already tried
installing a new
LCD screen module and tried updating the device
firmware but still the screen went wrong.
Refer to the solution below and do trace the LCD soldered pads connector down to the corresponding components such as the resistors and filter coils. The resistors has as resistance value of 22o ohms each. The VAUX is 2.8 volts and the VIO is 1.8 volts, you may also check these voltages.
This also includes the connection line paths of the LCD backlight LED, to fix if the white LED at the back of the LCD doesn't turns ON and shows a dark display.
0 komentar:
Posting Komentar